In sports, people talk about a go to guy or a go to play. What about in business or new product development? Where do you go during critical times? We find companies calling us to resolve those items. [Read more…]
Must Have a Go To
Archives for February 2019
ISO 9001:2015 Certifications and the American Society for Quality
Guest Post by James Kline (first posted on CERM ® RISK INSIGHTS – reposted here with permission)
I am a Senior member of ASQ, a quality professional association. I have two ASQ certifications. One, the Manager of Quality and Organizational Excellence (MQ/OE), is the highest general certification ASQ offers. The other is a Six Sigma Green Belt (SSGB). Over the past year or so, I have become concerned about the viability of ASQ. Some friends now liken ASQ to a Moose Lodges. While some lodges are still around, they are pretty much relics of earlier generations.
With the publication of the ISO 9001:2015 certification figures for 2017, the concern increased. This article looks at this issue and what the ISO 9001:2015 figures say about the disruptive environment ASQ faces. [Read more…]
Tracking Belts on Bucket Elevators and Short Belt Conveyors
Tracking belts on bucket elevators and short belt conveyors. Flexible, flat belts are used on bucket elevators and belt conveyors to carry loose, bulk product. The belt is stretched tight from head drum to tail drum and the friction generated on the turning head drum is used to drive the belt and carry the product. The belt must run true on the end pulleys (drums) and stay within the sides of the equipment structure. If the belt runs off the drums, buckets will be destroyed and belt edges frayed. In the worst cases the belt runs off the pulleys resulting in a breakdown repair. Proper and long- lived tracking of belts is critical for trouble-free operation. [Read more…]
Benefits of Comparing Lean/Kaizen with Agile/Scrum
Our previous article covered the benefits of comparing the DMAIC problem solving thought process with project management. The key takeaway was DMAIC can be more effectively executed using “measure & plan” phase.
Now let’s compare and contrast agile/scrum with lean/kaizen. While agile is primarily used in software development, there are many valid comparisons. By making this comparison, those familiar with kaizen will improve their understanding of agile and vice-versa. Also we’ll cover key success factors that are applicable to both.
How Risk Informed, Decision Making Change a Life
Guest Post by John Ayers (first posted on CERM ® RISK INSIGHTS – reposted here with permission)
Risk Based Informed Decision Making (RIDM) has a risk assessment as input as well as social and other benefits residual risks. This data or information empowers the person to make an informed decision. This following is an example of RIDM. [Read more…]
Dust Bag Selection for Bag-Houses
Bag house dust bag selection. The dust bags within a bag house must handle the process conditions they experience. The choice of bag materials is usually based on the cheapest fabric that will handle the conditions for a minimum of 3 to 5 years’ operation. The selection of the bag materials requires a good understanding of the process temperature, moisture content, chemical reactions with the bag fibre, dust loading effects and behaviour of the dust bags in operation. [Read more…]
Benefits of Comparing DMAIC with Project Management
Our previous article covered the benefits of comparing waterfall with agile, emphasizing the benefit of planning the agile process and product backlog content. In this article we’ll compare the Define, Measure, Analyze, Improve and Control (DMAIC) thought process, with a project management thought process.
DMAIC is a problem-solving thought process applies critical thinking to ensure robust problem solving. (See our previous article on the subject here.) DMAIC is not necessarily a process by which projects are managed, however. Recall the high-level project management process as follows:
The Rover Says Good Bye! :(
The Mars Rover is an incredible reliability story. And as you may know they have decided to permanently shut it off. A friend recently sent me this email when he saw an article on it.
Hey Adam,
The Opportunity rover was supposed to last 90 days, and instead lasted 15 years.
Is that due to remarkable engineering, or was the machine really supposed to last that long and the scientists blew their calculations as to its “lifespan”?
Mark,
My response:
100% Inspection
Introduction
When it is necessary to check 100% of parts for one or more characteristic?
There are situations where 100% of manufactured parts are checked. These include visual inspection, measurements of a part characteristic, and a reaction to low process capability. These may be accomplished manually or an automated process.
[Read more…]
Don’t Need a Science Project
What people need are practical business solutions. They do not need science projects – or efforts only for the sake of learning. [Read more…]
Don’t Forget to Subscribe to our Weekly Email Updates!
Stay informed on the latest content added to the site, including: articles, podcasts, webinars, live events and assorted other reliability engineering professional development materials added each week.
