Your Reliability Engineering Professional Development Site
In honor of Labor Day, I thought I would jump over to the Built-In Self-Test (BIST) wing of the DFT Castle.
I will provide you with a quick tour. Then when you hear the term in a meeting you can follow along and ask a few questions.
BIST saves labor for the Automatic Test Equipment (ATE).
Though there’s no free lunch. BIST does require an engineer to labor—someone has to design it specific to the device under test (DUT). [Read more…]
In a previous article I alluded to Design for Test (DFT) by mentioning a specific example.
The techniques have been around for decades. Just how long ago though?
I searched on “Design for Test” in the IEEE paper data base; the search resulted in 760 references the oldest being 1983.
Hmm there had to be earlier papers? So next I plugged in the key words “Design For Testability.” This time a list of 4,235 references appeared, the oldest one published in 1978. [Read more…]
What happens when you power up an electronics device with clocked circuits?
Well you have a clock running and you have clocked circuit elements, also known as sequential circuits. Latches, registers, basically any “memory” element. What could interfere with testing?
Do you know the state of that “memory element” when you start?
Heck No!
That’s a problem. [Read more…]
When I introduced you to the Stuck at Fault Model I stated that the size of VLSI devices necessitated the usage of Electronic Design Automation (EDA) tools to support testing.
My first full-time job at IBM exposed me to the world of test and to their EDA tools.
In the mid-1980’s, testing of logic devices relied upon the S@ fault model. Three common software tools included fault simulation, automatic test pattern generation, and fault diagnosis.
This article will provide an introduction to fault simulation as one can view the other two tools as applications built upon a fault simulator. [Read more…]
In the beginning– just test the specs.
Analog circuits have been around a long time. Consider a simple LRC circuit– the inputs and outputs are continuous wave forms.
This remains a key differentiator from digital circuits which operate on 1’s and 0’s.
Continuous waveforms require different test equipment and test techniques. Analog circuits have properties of impedance, 3Db points in the frequency domain, transform functions. They can be treated like a lumped circuit or a distributed circuit in which signal integrity and transmission line theory apply.
So testing is easy- you just test the specs. [Read more…]
Memory circuits store 1’s and 0’s for you so that you can retrieve them later. The 1/0’s can represent data or instructions.
Today, no computing device operates without some memory. Memory devices store pictures, music, documents. How many USB (Unified Serial Bus) memory sticks do you have scattered on your desk?
Semiconductor memory comes in many flavors: Dynamic Random Access Memory (DRAM), Static Random Access Memory (SRAM), Read Only Memory (ROM), Erasable Programmable Memory (EPROM), NAND/NOR Memory (a.k.a. Flash), Solid State Drive (SSD). Without power volatile memories like SRAM and DRAM lose their stored values. Non-Volatile memories retain their stored value when power is absence. [Read more…]
Semiconductor Integrated Circuits (ICs) can have millions of digital circuits which can translate to billions of transistors.
I know these numbers can be intimidating, but I assure you the challenges of testing ICs started in the mid-late 1970’s. Lots of effort has been put into Electronic Design Automation (EDA) systems and Design for Test (DFT) techniques to manage the development and application of digital circuit testing.
In the beginning these software programs and DFT techniques used the Stuck at Fault Model. [Read more…]
Depending upon the type of engineer you ask the word test evokes a different notion of goals and expectations.
Engineers who work on the design of semiconductors test that their designs meet the specifications.
This can be done pre-silicon and naturally verified in-depth on silicon.
Engineers concerned with manufacturing of a product test to find defects and to verify performance.
Similar approaches can be taken by both engineers though there exist differences in the amount of time. To be cost effective, a manufacturing test must be completed in as short a time as possible. Let’s continue to compare and contrast design validation with manufacturing test. [Read more…]
Before embarking on a complicated task one needs to have the basics understood.
In the musical “The Sound of Music,” Maria teaches the Von Trapp children to sing by first teaching them the musical scale.
She quickly discovers that the basics really do need to be learned one note at a time.
By the end of the “Do Re Mi” song she has them singing harmony while she sings a new melody with the words “When you know the notes to sing, you can sing most anything.” [Read more…]