Your Reliability Engineering Professional Development Site
Over the past few months, we’ve received some questions about accelerated life testing. There are bound to be more questions as ALT can be confusing to plan, conduct, or interpret. Let’s get together and address your questions related to ALT. [Read more…]
Creating a plan and generating information is part of reliability engineering, yet it’s not enough. To be a successful engineer, one must communicate well. This means we need to write, discuss, and present well. We are often called upon to examine failures and recommend solutions, examine a dataset and explain the finding, or conduct an experiment and detail the results. [Read more…]
A key element of reliability engineering is doing the right thing at the right time. When running an experiment or test, conducting an assessment, or performing an analysis, the method we use must fit the situation. Being busy does not add value; getting meaningful results does. [Read more…]
This is an overview of the six steps to achieve high reliability from Carl and Fred’s book. Creating and executing a reliability plan that assists the team in designing, manufacturing, and supporting meeting reliability objectives takes effort. Let’s discuss the details of that effort so that you can focus on the critical steps. [Read more…]
Once word got out that I was taking graduate-level courses in statistics, I dreaded the knock on the door. Colleagues, some of which I knew and others from some far reach of the company, would ask if I could take a look at their data. I didn’t learn the necessary first steps with a stack of data in class.
I’ve lost count of the number of data sets I’ve reviewed and analyzed. I know there are important considerations and questions before creating the first plot. Let’s review the essential first steps you should take when presented with data.
[Read more…]
We have many options to learn reliability engineering—books, magazines, newsletters, conferences, seminars, etc. We have options. Some options are better than others, depending on what you want to know. Likewise, some options are better than others, depending on what you want to share.
After 30 minutes of being on hold, I wasn’t sure what to expect from customer service for a product reliability issue. The scratchy soundtrack didn’t foretell a great experience either.
Once connected to a company representative, we resolved the issue quickly and satisfactorily. Unfortunately, that was a pleasant surprise. All too often, the frequently repeated “Your call is important to us.” (an Amazon affiliate link) just isn’t true, in my experience.
Did you know that customer service can add significant value to an organization, especially when product reliability doesn’t meet customers’ expectations? Besides providing the team with valuable product reliability performance information for past products, the service team can improve customer loyalty.
[Read more…]When working with a team creating a new system, I always ask, “what is the goal?” The answers often do not make much sense. The team using SMART reliability goals are astonishingly well-stated.
The difference that makes a goal, objective, or requirement practical and useful is summed up by SMART. A SMART goal is Specific, Measurable, Achievable, Relevant, and Time-bound. Let’s explore each element as related to a reliability goal.
[Read more…]
While I’m not much of a New Year’s Resolution guy, I guess I’ve set a resolution. I need to restart writing weekly articles for Accendo Reliability.
The thing is, I struggle to write. Plenty of other interests and tasks keep me away from the keyboard. Yet, as I explained to a few new authors how writing and posting on Accendo Reliability is a good thing, I realized I have been putting off hitting the keyboard again.
Over the past few weeks, I’ve explained to those interested in writing articles about the virtuous circle created by having many authors contribute articles, which increases interest, engagement, and traffic to those articles, which further increases the reach of those articles. Of course, this is just one reason, and there are others, plus plenty of hurdles to overcome.
[Read more…]
The reliability performance of a product or system exists because the decisions that occur during the creation of the product establish how well an item will survive without failure. The choice of material, finish, or technologies, along with all the other decisions involved, define how well a product performs, including its reliability. [Read more…]
In my opinion, as I do not know if this is true or not, every product or system failure has a cause. Causes are not exactly the same as what we call ‘failure mechanisms’, yet they are related in many cases. One more term to consider is ‘failure mode’, which refers to the symptoms or results of a failure. [Read more…]
What is it that makes the difference between good and great related to reliability engineers? What is the magic element that separates those who can carry out tasks such as facilitating an FMEA or designing and analyzing an ALT from those who impact an organization’s culture? A good impact that improves the organization’s ability to create reliable products.
Gage R&R – this is mainly a quality tool, where 10% is a pass and 10-30% is “marginal.” What does that mean, or even better yet, how can I use gage R&R to provide meaningful results in a design environment without specifications? In 30 minutes, we will discuss how you can calculate Gage discrimination – the more useful result for a design situation, and even how to use it for destructive reliability tests.
[Read more…]
Both reliability and maintenance activities work to reduce failures and downtime. Perfect reliability of a system would eliminate the need for maintenance. Perfect maintenance would keep even poorly designed (reliability-wise) operating.
Together, the work of reliability and maintenance professionals can achieve more than each team working separately. Each brings a set of insights and skills to the conversation. Working together means improving the design of a system so it’s easier to maintain. It also means the maintenance teams’ day-to-day observations provide meaningful information to the reliability team.
In manufacturing environments, especially in high-volume production processes, it is important to ensure the highest Machine availability rate for critical equipment as a crucial factor in achieving the expected output goals. The more the availability value there is, the better the plant’s capacity to achieve production requirements since the time available for each piece of equipment will be maximized.
[Read more…]