Building Your Reliability Program From Scratch
Abstract
Adam and Fred discussing the considerations when building a new reliability program.
ᐅ Play Episode
SOR 152 Building Your Reliability Program From Scratch
SOR 151 Introduction to Software Reliability
Introduction to Software Reliability
Abstract
Carl and Fred discussing the subject of Software Reliability, as part of a comprehensive reliability plan.
ᐅ Play Episode
Time to Failure Data Analysis for Your Factory Equipment
Time to Failure Data Analysis for Your Factory Equipment
We have data. Often, an abundance of data concerning equipment failures. Failures per month or MTBF-type measures do not reveal sufficient insights to understand the pattern of failures.
22 – The ABC’s of Asset Management with Scott Kelley
The ABC’s of Asset Management with Scott Kelley
In today’s episode, our guest is Scott Kelley and the discussion is about the ABC’s of the asset management. Most of the organizations fail in the implementation of this process or they don’t get good results. That’s why they need to follow the ABC’s of Asset Management. These are:
A – Always have the “RIGHT” executive sponsor
B – Before you begin have a vision or model of the finished product or outcome
C – CONSTANT & CONSISTENT implementation.
These principles are key to the success of any Asset Management Program.
SOR 150 Introduction to Hazards Analysis
Introduction to Hazards Analysis
Abstract
Carl and Fred discussing the use of Hazard Analysis as part of a comprehensive reliability plan.
ᐅ Play Episode
SOR 149 Introduction to Reliability Centered Maintenance
21 – What Makes a Good RCA with Fred Schenkelberg
What Makes a Good RCA with Fred Schenkelberg
This episode is based on the discussion on Root Cause Analysis also known as RCA. It is a technique which is used to solve complex problems when finding the origin of any failure gets difficult. RCA includes a series of steps that lead right to the place from where the problem originated.
ᐅ Play Episode
SOR 148 Introduction to Design Review Based on Failure Modes
Introduction to Design Review Based on Failure Modes
Abstract
Kirk, guest John Paschkewitz, and Fred discussing how DRBFM (Design Review Based on Failure Modes) was developed and how it is similar to FMEA (Failure Modes and Effect Analysis).
ᐅ Play Episode
SOR 147 How HALT and Degradation ALT Work Together
How HALT and Degradation ALT Work Together
Abstract
Kirk, guest John Paschkewitz, and Fred discussing the differences and similarities in mechanical HALT testing of motors and degradation testing for wear out modes. Kirk discusses the use of PHM (Prognostics and Health Management) to measure and provide RUL (Remaining Useful Life) estimates during its application.
ᐅ Play Episode
SOR 146 More on Mechanical System HALT
More on Mechanical System HALT
Abstract
Kirk, guest John Paschkewitz, and Fred discussing some of the differences from electronics HALT in applications on mechanical components of a system for reliability development.
ᐅ Play Episode
SOR 145 Reliability Goal Setting and Safety
Reliability Goal Setting and Safety
Abstract
Carl and Fred discuss reliability goals, including both performance and safety.
ᐅ Play Episode
SOR 144 Analyzing a Reliability Program Assessment
Analyzing a Reliability Program Assessment
Abstract
Adam and Fred continue their three part series on Reliability program assessments
ᐅ Play Episode
SOR 143 Conducting a Reliability Program Assessment
Conducting a Reliability Program Assessment
Abstract
Adam and Fred discussing how one goes about conducting an assessment.
ᐅ Play Episode
19 – The Role of Alignment in Precision Maintenance with Alan Luedeking
The Role of Alignment in Precision Maintenance with Alan Luedeking
In today’s episode, our guest is Alan Luedeking and the topic of discussion is alignment and precision maintenance. The first thing that pops up into the mind is that where to start with the precision maintenance. The first step can be keeping all of your equipment aligned because that really helps to avoid common problems in equipment. The alignment saves you a lot of money, increases the productivity, and efficiency. After this, we can start monitoring activities all along the way.
ᐅ Play Episode
SOR 142 Preparing for a Reliability Program Assessment
Preparing for a Reliability Program Assessment
Abstract
Adam and Fred discussing a few critical steps when preparing for an program assessment.
ᐅ Play Episode
