Your Reliability Engineering Professional Development Site
Find all articles across all article series listed in reverse chronological order.
It’s Friday so I thought I would go back in the archives and find something light and meaningful. Enjoy 🙂
I can remember thinking my dad was old when he turned 50. While I might look old to my kids I don’t feel old. When I look in the mirror each morning I still see the person I saw yesterday and he doesn’t look any older than he did the day before. [Read more…]
One of the most important, but often the least effective parts of the Maintenance Planning & Scheduling process, is the work order close out step. Here critical data is supposed to be captured and used to improve the job plan, identify future work and improve reliability. All of these add up to improve the profitability of the organization. [Read more…]
Excluding primary practices that still prevail in most industrial companies, the evolution of MRO Materials Management Technology can be summarized in three technological waves, as shown below.
There are many grave technological limitations. However, in view of room limitation, I will mention just two of the most relevant and easy to understand limitations. [Read more…]
Guest Post by Ed Perkins (first posted on CERM ® RISK INSIGHTS – reposted here with permission)
There is a lot of literature written on decision making, ‘how to’, best practices, process, factors and so to follow to make ‘good’ decisions. We have been exploring ‘risk based’ decision making in these blogs. We have looked at factors, process, frameworks, psychology and bias.
But we have not discussed perhaps the most important aspect of any decision – implementation or that double edged word ‘execution.’ (Of course this assumes that the decision maker wants something to actually happen as a result of the decision, but that is a topic for another day).
Let’s use the nicer word – Implementation – which implies there is a course of ACTION, with a timeframe for results to be produced or to occur. [Read more…]
Steam is often used for heating liquids. Heat is provided to a liquid either through a heat exchanger or by direct injection of raw steam. The injection of steam directly into the process is known as steam sparging. The sparge design and location affect the efficiency of the process.
Keywords: boiling, heating water, temperature increase, injector, lance, boiler pressure, properties of steam. [Read more…]
We are rather good at being surprised when setting expectations for the future. This is the essence of risk. The difference between what we expect to occur or would like to occur, and what does occur.
The definition of risk in ISO 9000:2015 and ISO 31000 include the phrase “ effect of uncertainty”. Let’s remove some of the uncertainty around the term uncertainty in the context of risk and risk management. [Read more…]
I don’t know if you recall a post from my blog, “HALT Testing is Not Always In a Chamber”, that discussed what I consider to be the first documented HALT test. Well I just found a video of the design solution in action and it is super cool. I discussed how during 
the development of the F1 rocket motor, for the Apollo space program, they solved a design issue with a HALT technique, although they didn’t call it HALT at the time. The issue they were attempting to solve was the thrust nozzles fracturing due to oscillating vibration. [Read more…]
While working in the field of Asset Management formerly known as Maintenance and Reliability for over 30 years I have worked with my share of Managers and Leaders. Those who have known me for years know that I started in the field as a Pipefitter Apprentice, worked as a Journeyman and Team Leader for a number of years, did a stint as a Maintenance Supervisor, went to night school to become a Reliability Engineer and then as a business owner working with customers around the world. [Read more…]
In search of excellence in MRO Materials Management (indirect materials / spare parts), I have noticed two curious facts.
First, even in developed countries, industrial companies and providers of ERPs (enterprise management systems) are technologically very backward in this specialty.
Second, those very little companies or experts who developed differentiated technology keep it safe guarded as a trade secret.
This exposure results in considerable accumulation of knowledge and expertise, and a unique set of observations and conclusions which certainly could not fail to be shared with the concerned community. [Read more…]
Coordinating all of the maintenance activities within a site can be overwhelming. A schedule is supposed to help reduce the sense of being overwhelmed. But why is it that when trying to pull together a schedule for the next shift, day or week, it always seems to be a mad dash?
Often times the maintenance scheduling process is not well defined or thought out, and this leads to being overwhelmed. It also projects an image to our operational partners that we do not have our house in order. This image may or may not play a role in having our Maintenance windows moved or cancelled, further our scheduling issues. [Read more…]
Guest Post by Chris Peace (first posted on CERM ® RISK INSIGHTS – reposted here with permission)
Sometimes, it seems that every newspaper edition, news broadcast or news website carries yet another story about a disaster – an event that might have been avoided by better decision making.
But do we ask whether such decisions were informed by risk assessments? And if so, how effective were those risk assessments for informing the decision makers about the risks? Which techniques were used in the risk assessments? Were the results presented in a way that made sense to the decision makers? Do risk assessors follow a good process and so achieve some consistency in results, or do they just get lucky? [Read more…]
The differential pressure transmitter (PT) is used to detect a head of pressure.
The sensing element is connected to the process by pipework and flexes in proportion to the pressure. The resulting distortion produces an electric signal that is amplified and converted to a value on a read-out.
Keywords: pressure sensor, strain gauge, tank level, process pressure, pressure difference. [Read more…]
This is the third session from the Annual Apex Ridge Reliability Seminar held in Boston.
In this session, I discuss the methodology of HALT and how to connect it with program tools and objectives.
The philosophy of HALT is often misunderstood simply due to its name and acronym, “Highly Accelerated Life Testing” (HALT).
It is not an accelerated life test, it’s really not even a test. HALT is a process of increasing stress on a design to induce failures for the purpose of learning about the design and improving its robustness.
It’s a discovery process. [Read more…]
In a customer’s mind, the product works or it doesn’t. If it doesn’t work as expected it has failed. This may or may not be a reliability problem.
A customer or someone using your product brings a set of expectations to the experience. The range of expectations may range from very little to very high functioning, value production, and durability.
Failures are defined by customers.
In part, this is the functional capability, the operating within specifications, and the durability. The customer’s definition of reliability may or may not follow the design specifications.
It is the comparison of what should happen to what does happen. [Read more…]
