Your Reliability Engineering Professional Development Site
Speaking reliability-wise, parallel, means any of the elements in parallel structure permit the system to function. This does not mean they are physically parallel (in all cases), as capacitors in parallel provide a specific behavior in the circuit and if one capacitor fails that system might fail.
In this simple drawing, there are n components in parallel and any one component is needed for the system to function. [Read more…]
The annual salary survey done by American Society for Quality (ASQ) is summarized in the December 2011 issue. And, the good news is a CRE certification provides approximately a $21k salary premium over those in similar positions without the certification. Based on Table 2. salary premiums for certification holders in the article, Land the Big One, indicated the largest premium is [Read more…]
Each piece of gear used in rock climbing has the potential to be the weakest link. Often, based on accident reports, it the human decisions or lack of focus that is the most difficult to improve.
Ropes, anchors, harness, and carabiners and another equipment all have to work in the event of a fall. The design of each piece of equipment is to meet and hopefully exceed any possible load. And, to maintain the needed strength over years of harsh outdoor use. [Read more…]
Reaching for a goal may include taking some risks. In reliability testing, we are often limited by the number of samples available for testing. And, in the case where time is available or the acceleration factor is high we can take advantage of testing longer. [Read more…]
One of the most often asked questions of reliability professionals (or statisticians) is related to how many samples for a test? This typically is not an easy question to resolve without some work and knowledge of the testing in question. We are often asked anyway, and expected to have an answer.
While not the most often asked question on the CRE exam, you might see something related. Budget planning, prototype counts, test equipment sizing, etc. all need an estimate for sample size. [Read more…]
Diverging from reliability statistics for a post or two, let’s consider one way which R(t), reliability at time, t, is useful during the design phase of a product. Apportionment is the breakdown or allocation of reliability goals or objectives to elements within the product.
Overall, the product’s reliability is just one number, and it represents what the customer will experience with the product. During design, we often work on subsystems and components. Having a meaningful way to describe the reliability requirements that also assists the team to meet the overall product goal, is, well, useful. [Read more…]
“Statistics is the language of variation.” I’m sure that is a quote by someone, not me, though. It is true. Statistics is all about variation. In this post let’s explore some of the ways statisticians talk about data and specifically the amount of dispersion in the data. [Read more…]
This is hopefully completely a review. The mastery of basic statistical terms is important as many of the questions on the CRE are statistical in nature and rely on your understanding the terms. Let’s simply review the terms, and do let me know if you have any questions.
Let’s take a random sample from a population. Given a [Read more…]
Generally, I do not talk about statistics before 10am – it’s not polite.
As a reliability professional, statistics is a central feature of the value I bring to the team. And, not just the reliability statistics, all stats. It continues to amaze me how many engineers, scientists, and professionals tend to avoid statistics. [Read more…]
There are four functions related to life distributions of importance to reliability engineering.
Nearly all textbooks on reliability either introduce or use these functions. Likewise, nearly every calculation related to reliability statistics also uses at least one of functions.
Suppose we produced 100 units of a product and tracked them all till failure over time.
Eventually, all of them would fail. And, unlike the Parson’s One Hoss Shay the products and their components would not all fail at the same time.
One way to track the failures over time is to use a simple histogram.
By plotting the number of failures each month, for example, we would [Read more…]
Understanding the math is critical not only for the exam, but it is also important for your ability to function as a reliability professional.
Most of us did not enjoy our undergraduate statistics course. It was just another course to endure as part of being in an engineering or science track.
The basic concepts and approaches to working with data are fundamental for some many situations. [Read more…]
As 12%* of the CRE exam, this is a major section, yet not a very difficult one. There are three basic areas:
If you’ve ever needed to secure funding or samples for a reliability test or had to respond to customer field returns, then you probably already understand the value of reliability.
In some businesses, product reliability is critical to the product’s success. Some businesses strive to be the leading ‘reliable’ producer in the market. [Read more…]
I’ve learned a lot in my career and have attempted to help others to the best of my ability.
Teaching is fun.
It is also enjoyable to know a little of what I’ve learned from others may continue to be passed along.
The ASQ CRE certification is a milestone in a reliability engineer’s career. It is not an end nor a beginning, just a milestone to mark the achievement.
The CRE BOK encompasses a broad range of concepts and tools.
Passing the exam marks the person as having mastered the body of knowledge as laid out in the ASQ CRE BOK.
