How to Find an Intermittent Failure Mechanism?
Abstract
Kirk and Fred discussing ways to find intermittent system failures.
ᐅ Play Episode
SOR 380 How to Find an Intermittent Failure Mechanism?
SMRP18 – Is It Time for a CRO with Allan Ross
Is It Time for a CRO with Allan Ross
It is a common practice in the organizations to spend money on the maintenance of the equipment. They bring in a lot of people on board to fix the machines and every time a failure occurs, the maintenance guys do a temporary fix, and on and on it goes. In this process of fixing machines, if the organizations paid as much attention to the reliability of the assets rather than divert all their resources towards maintenance side of things, they might finally have a sustainable maintenance and reliability program. Maintenance and Reliability go hand in hand. You can’t just focus on maintenance alone.
ᐅ Play Episode
SOR 379 What is Operational Failure and How Do I Know?
What is Operational Failure and How Do I Know?
Abstract
Kirk and Fred discussing a real case of product failure for a OEM sub-supplier and determining how to isolate the cause
ᐅ Play Episode
SMRP18 – What is IIoT with Blair Fraser
What is IIoT with Blair Fraser
There are new emerging technologies that are helping organizations in the Maintenance and Reliability industry. Artificial Intelligence and the Internet of things are one of the hot topics out there. The part of IOT that is used for the industry best practices is called iIOT. When it comes to the Predictive Maintenance, iIOT and Augmented Reality are one of the best solutions in the Market. They might be suitable for organizations that have a legacy to live up to but the money that you invest in these data sensing technologies is worth everything.
ᐅ Play Episode
136 – 5 Tips to Delegate without Fear with Lisa Brownlee
5 Tips to Delegate without Fear
Delegation is one of the most important pieces of leadership and organizational development. Delegation means that you are sharing the resources for the betterment of resources. It not only helps in organizational development but it also helps in individual growth of the employees. The thing with delegation is that it requires acceptance and willingness of the personnel to be successful. The other difficulty comes forth when there are individual agendas and egos are at stakes. Some people just have a hard time letting go of the control and power that they have. But overall, delegation is a key trait that helps you bring about the change management.
ᐅ Play Episode
RRP 030 Alcohol & Weight Loss with Dr. Liam LaTouche, ND
RRP 030 Alcohol & Weight Loss with Dr. Liam LaTouche, ND
On this week’s episode, Dr. Liam LaTouche, ND returns to the show. We talk about staying healthy over the holidays, alcohol consumption and effective weight loss.
Check out Liam LaTouche Wellness – liamlatouche.com
Check out Thrive Workplace Wellness –thriveworkplacewellness.com
Follow Rob’s Reliability Project on LinkedIn –www.linkedin.com/company/robsreliabilityproject/
Like Rob’s Reliability Project on Facebook –www.facebook.com/robsreliabilityproject/
Follow Rob Kalwarowsky on LinkedIn –www.linkedin.com/in/robert-kalwarowsky/
If you have any questions, business inquiries or if you’d like to appear on the podcast, email me atrobsreliabilityproject@gmail.com
SMRP18 – Planning and Scheduling with Jeff Shiver
Planning and Scheduling with Jeff Shiver
Planning and scheduling is a term often used in the organizations. It might be used together but there is a difference in ‘planning’ and ‘scheduling’. Planning is when you determine what jobs you have to do, develop a procedure to execute the job, assign resources, and then utilize those resources in the best way possible. Only when you have successfully planned a work-order, you can decide when to do it in the scheduling part. So both the processes go together and one can’t be completed successfully without the other. Only scheduling something is not going to help you successfully implement it.
ᐅ Play Episode
SOR 378 Why Pareto Analysis is Not Sufficient
Why Pareto Analysis is Not Sufficient
Abstract
Adam and Fred discussing how Pareto analysis can be a good guide for failure mode analysis but is only a start for the process.
ᐅ Play Episode
Fundamentals of Reliability Related Standards
Fundamentals of Reliability-Related Standards
podcast episode
Standards provide guidance, a common language, and a bit of confusion. Using the right standard and using it well can help your reliability program. Using standards poorly will harm your ability to create reliable products.
[Read more…]
SOR 377 Reliability Data and Decisions
Reliability Data and Decisions
Abstract
Adam and Fred discussing how data influences design and program decisions.
ᐅ Play Episode
SMRP18 – How Work Management Improves Reliability with Owe Forsberg
How Work Management Improves Reliability with Owe Forsberg
Work management directly impacts the reliability function within the organizations. Work management means to utilize your resources in the best way possible to drive improvement and performance. These resources may include spares, systems, and all the other tools that can help you maintain the equipment.
ᐅ Play Episode
135 – Implementing a CMMS with Jeff O’Brien
Implementing a CMMS with Jeff O’Brien
When an organization decides to replace or transition all of their storage data onto a CMMS, it is not just about making the work easier and efficient. You can’t just buy a software online and the expect it to solve your maintenance issues and reduce cost. CMMS is just a tool to improve your work order by properly integrating it with your current data systems and then plan your work so that you would not have to make uninformed decisions anymore. You will have all the data to help you make an intelligent decision, save time, and reduce your maintenance cost in the end.
ᐅ Play Episode
RRP 029 Ultrasound with Sean Miller
RRP 029 Ultrasound with Sean Miller
On this week’s episode, I welcome Sean Miller from UE Systems on to the show. We talk about using ultrasound for lubrication and as a predictive maintenance tool.
If you have any questions, business inquiries or if you’d like to appear on the podcast, email me atrobsreliabilityproject@gmail.com
Check out UE Systems – uesystems.com
Follow Rob’s Reliability Project on LinkedIn –www.linkedin.com/company/robsreliabilityproject/
Like Rob’s Reliability Project on Facebook –www.facebook.com/robsreliabilityproject/
Follow Sean Miller on LinkedIn – www.linkedin.com/in/sean-miller-cmrp-21352314/
Follow Rob Kalwarowsky on LinkedIn –www.linkedin.com/in/robert-kalwarowsky/
SOR 376 Collecting Data and Condition Monitoring
Collecting Data and Condition Monitoring
Abstract
Alex Desselle and Fred discussing dealing with and using data especially concerning condition monitoring.
ᐅ Play Episode
SMRP18 – Precision Alignment with Adam Stredel
Precision Alignment with Adam Stredel
Precision alignment plays a vital role in preventing premature failures and keeping the equipment up and running. Precision alignment can be defined as when the rotation with the center-align of the equipment is as collinear as possible. There can be a tolerance in the alignment depending upon the operating conditions. There are different types of tools to measure the misalignment but precision alignment using the laser is becoming trendy in the organizations. They are moving from old tools like straight edge and want to make sure that there is accuracy in the measurement. Even a dial indicator works just fine for alignment.
ᐅ Play Episode
